SC DrillTechSC DrillTech← Home
Knowledge base · Free

The method, in the open

The formulas, target bands and definitions behind every SC DrillTech recommendation — open for any engineer to use. No sign-up required.

Core solids-control formulas

Engineering relationships and field guide bands, with units stated below. Verify operating targets against OEM duty and site procedure; these are not universal API limits.

QuantityFormulaTarget / band
Shaker / centrifuge G-forceG = N² · s ÷ 70,414N in rpm; s = full shaker stroke or bowl diameter, inches. Verify OEM duty.
Agitator turnover (TOR)TOR = (V ÷ Q) · 60V in gal; Q in gal/min; result in seconds. 40–85 s is a field guide, not proof of suspension.
Hydrocyclone feed headh = 19.2 · p ÷ ρp in psi; ρ in ppg; h in ft of pumped mud. Use OEM cone head.
Line velocityv = 0.4085 · Q ÷ d²Q in gal/min; internal d in inches; v in ft/s. Check service and erosion limits.
Solids removal efficiency (SRE)SRE = 100 · Vremoved ÷ VholeDrilled-solids volume removed / excavated hole volume, same interval and units; interpret with MCR.
Two-component solids mass fractionwₐ = 100·w₃(w₁−w₂)/[w₁(w₃−w₂)]w₁ = mixture, w₂ = liquid, w₃ = solids density, same units; not equipment recovery.

More to explore

Glossary & nomenclature

Every symbol and unit used across solids control, mud and DWM — defined in plain language.

API RP 13C notes

Field notes on processing-system evaluation and screen designation; the Sixth Edition uses SRE and MCR alongside dilution and waste-volume analysis.

Calculator cheat-sheets

One-page references for the most-used calculations — the lite version of the tool kits.

Field FAQ

Common solids-control and waste questions, answered from rig experience.

Environmental & compliance

EPA, OSPAR & ROPME discharge limits and zero-discharge — explained for the field.